Waist Cincher Corset is finished

The fabric used for this waist cincher corset is "spot broche" coutil also known as "dot coutil". It's the most durable of all coutil and I've opted to use it without any fashion fabric as it's very pretty as it is.  The bone casings are on the inside of the corset and I've bound the seam allowances to create some of them. Doing so meant there was no need for a lining. So this corset is made from just one layer of seriously strong fabric - dot coutil. Note the little pocket I added - it may seem too tiny to be of much use but it's all I need to carry a folded up bill or change.

 

I used decorative stitching to indicate some corset bone placements.  I edge stitched the seams in a contrast colour; more for a design detail than any necessity and I used a decorative stitch to secure the top binding of Petersham ribbon. The bottom edge was bound in the same Spot coutil the corset was made from. 

 

Instead of grommets I used black D-rings set w black rivets down the center back and lace the corset with nylon flat braid black lacing. The back includes a modesty panel made from the spot coutil.

All materials used can be found on the

Farthingales Corset Making Supplies web site

www.farthingalescorsetmakingsupplies.com

Using "D" rings on a corset

Tips & Tricks

Click the title above to buy product or find more costume and corset making tips.

"Lacing Rings" are "D-rings" that have been mounted on a tab that has a hole in it, the hole is there to allow you to attach the ring to the corset, either by sewing or riveting.

Instead of using grommets or eyelets to lace up a corset you can use "Lacing Rings" or "D-rings" and the best way to attach either lacing rings or d-rings is to use rivets. You could sew them on using a button hole stitch and quilting thread but rivets are more secure.You can also decorate a corset with rivets. It's best to attach rivets with a rivet setting die on a press or twist machine.

For security give serious consideration to using lacing bones with your riveted "lacing rings", the lacing bones mean the rivet will be secured in the steel bones rather than just in the fabric.

The photo shows all the parts without the fabric; white steel lacing bone, rivet base, rivet cap and "lacing ring" or D-ring. All are in an "antique brass" finish.



I'm not using fabric so that you can see exactly what is happening. Imagine the bone is in your finished corset. (See "How to use Lacing Bones", in the Tips and Tricks section if needed) .

Place the rivet base through the lacing bone hole from the wrong side (inside) of the corset.



Place the "Lacing Ring" (D-ring unit) on top. Keep in mind your lacing bone is encased in the corset fabric. As you can see in the photo below, the rivet is fairly long but depending on the bulk of your fabric (especially if you're using heavy upholstery fabric) you may have a problem so always check before you try and set the rivet.



Now add the rivet cap.



Once the rivet cap is placed on top take the unit to the rivet setter. Some people do use a mallet (a metal hammer will crush the rivet cap/head) but the best set is with a rivet setting die on a machine.

Consider switching colours around. Here we show a brass rivet with a black lacing ring.